This is the most precise method for aligning scans. During the procedure, the application shows detailed instructions.
Tap Next Scan
Tap 2 Corners
In the next screen you see all the available points for selection.
Tap the corner A you want to use.
Tap Confirmation
Tap the corner B you want to use.
Tap Confirmation
The application now prompts you to move the 2Dscanner to a new position.
So move it and point the laser at the left start of corner A.
Once ready, tap Get Distance.
The 2Dscanner will scan the first corner.
Once detected, you can skip the rest by tapping on the green button.
But it’s better to let it scan as much as possible.
It will try to scan points up to the same length as before.
If it finds a point off the line, it stops.
Automatically, the 2Dscanner will move to the left start of corner B.
Adjust the aim if needed and tap Get Distance.
Once the second corner is detected,
the scans will be aligned and you will be asked to confirm.
Tip: Try to avoid small corners less than 20×20 cm.
We need at least 5 points on both sides of the corner.